Is Ceramic Coating Easy To Apply?

A ceramic coating is a wise investment that will improve the appearance and raise the value of your vehicle. The level of protection offered by ceramic coatings has made them a very popular choice among car owners in recent years. However, is it easy to apply a ceramic coating? The answer is yes, but there are other processes involved that you should consider. Continue reading this article by Mayvinci to learn more about the ceramic coating application process!

How Can We Apply Ceramic Coating?

Ceramic coating application is easy. It consists of multiple stages, which, if followed correctly,  will help your ceramic coating last for years.

Wash Your Car

Wash and rinse your vehicle using the two bucket method to remove dirt and grime from the paint surface.

Clay Bar

Once the surface has been cleaned of dust and grime, it’s time to use a clay bar product to remove stubborn contaminants. Work section by section with the clay bar until the entire car's exterior has been adequately cleaned.

Paint Correction

Now that the surface has been adequately cleaned of dirt, grime, and contaminants, we can inspect scuffs, swirls, and fading paint. The paint's surface must be sanded so the ceramic coating can attach and produce a glass like gloss. Utilize rubbing compounds, scratch removers, or a high quality polish to get the perfect paint finish. This procedure may be time consuming, but the result will be beneficial.

Paintwork Condition

Wipe each component with rubbing alcohol and a clean microfiber cloth to ensure the surface is free of polish, wax, oils, and other contaminants. This will ensure that the ceramic coating clings to the surface without difficulty.


Ensure that the panel is spotless and icy to the touch. Using a soft, clean microfiber cloth or applicator, apply the product evenly throughout the surface until it disappears. The ceramic coating takes around ten minutes to attach to the surface.

Aspects influencing the application of ceramic coating.

the application of ceramic coating


The best temperature range for applying ceramic coatings is between 10°C and 25°C (50°F and 77°F), with 20°C (68°F) being the optimal temperature for the majority of layers. To prevent the panels from overheating, keeping your vehicle away from direct sunlight is vital.


When applying the ceramic coating, controlling humidity and direct sunlight exposure to the utmost degree is also crucial.

The effectiveness and uniformity of a ceramic coating's curing period will also be significantly impacted by humidity and the sun's UV radiation. Make every effort to keep your vehicle away from direct UV sunlight for at least two days after the ceramic coating application.

Prep Work

Preparation is required before applying the ceramic coating. Before applying a ceramic coating, the surface must be prepared. With enough surface preparation, the ceramic coating will adhere properly. 

Does Ceramic Coating Take Time To Fully Cure?

Depending on environmental factors like humidity and temperature, the curing stage will last between two and three weeks. The coating is less sensitive to etching than the factory clear coat, but it is especially prone to water spots during curing, which may be costly to remove. Throughout the drying process, avoid parking under trees, especially if their leaves are falling. Additionally, we must avoid bird droppings, sap, and pollen from baking in the sun on the car.

Can Ceramic Coating Be Applied During Cold Weather?

Yes, but we must guarantee that the temperature is not too cold. The ceramic coating must only be applied if the temperature is high enough. Applying a coating below 40 degrees Fahrenheit (4.40 degrees Celsius) will not be effective. It will slow down the curing process and make the layer useless.

Ceramic coatings at Mayvinci in Los Angeles, CA, are the most effective method of protecting your car from everyday wear and tear. Mayvinci offers high quality ceramic coatings, which are applied by our team of fully trained experts. If you are interested in our ceramic coating goods and services, please contact us at 1-424-335-6356 or visit our shop at 854 S. Robertson Blvd., Los Angeles, CA 90035, United States. Schedule an appointment now!

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
This email has been registered