Is It Good To Apply Several Layers Of Ceramic Coating?
Ceramic coating is a great method for safeguarding your car from damage and deterioration. But should we apply numerous layers of ceramic coating to a car’s exterior? What considerations should be made while applying a ceramic coating? Read this article from Mayvinci in Los Angeles, CA, to learn more about ceramic coatings!
Can We Apply Multiple Layers Of Ceramic Coating On A Car's Paint?
Yes, it is possible to use more than one layer of ceramic coating. We advise applying two applications of base coat and one layer of top coat for superior protection, sheen, gloss, and hydrophobicity. This adds 2-3 microns of ceramic coating to the car's clear coat.
What Is The Process Of Ceramic Coating Application?
Step 1: Ensure that the vehicle has been thoroughly cleaned, using a wash, iron remover, decontamination pad/towel, or clay bar, as appropriate. The surface must be polished before ensuring cleanliness, smoothness, and aesthetic appeal.
Step 2: Apply a few drops of ceramic coating to a small area using an applicator or an applicator cloth. Working the coating into the paint with mild pressure, distributing it thinly and rationally to a small area while working in sections is suggested. Please carefully follow all directions provided by the manufacturer.
Step 3: The beginning of the leveling process Using a clean microfiber cloth, carefully wipe away any remaining product, beginning where you originally applied the coating. This will ensure that the coating is applied evenly and uniformly for optimal protection and aesthetics.
Step 4: Upon completion, check the results and, if any haze remains, attempt to remove it by wiping the area again. If the haze remains, immediately repeat Steps 2 and 3.
Step 5: Once the panel or component seems undamaged and fully restored, move to the next section and continue Steps 1 through 4 until the whole vehicle is protected.
How Long Does Ceramic Coating Take To Apply?
Typically, the application of a ceramic coating takes two to three days. The preparatory phases usually take one to two days to complete. The coating must also cure, typically for 12 to 24 hours.
The most labor intensive component of the procedure is preparing the paintwork for a coating. It is crucial to carefully prepare the surface to ensure that the coating bonds to the paintwork. It requires thorough decontamination, polishing, and panel wiping. Otherwise, the layer will fail and not attain its greatest durability potential.
How Do You Preserve The Appearance Of A Ceramic Coating?
Ceramic coating is a fantastic way to make your automobile gleam while increasing the life of its paintwork! However, the ceramic coating will deteriorate and fade with time! For a ceramic coating to last for years, adequate maintenance is required. Here are the recommendations made by Mayvinci.
Clean your automobile every two weeks.
The hydrophobic qualities of the ceramic coating will assist in eliminating any impurities and avoiding water stains.
Employ the two bucket method.
You will contaminate your vehicle's shampoo if you do not use the two bucket hand washing method. The two bucket procedure reduces swirl marks, and hand washing results are always great! One bucket should contain only water, while the other should contain shampoo, so the wash mitt may be rinsed in the water bucket before additional soap is applied to the vehicle.
Do not wash your vehicle in direct sunlight.
If water is present on your car, it will dry fast and create water stains. The optimum time to wash your automobile is in the early morning or late at night.
A ceramic coating is a wise investment that protects a car's paint against the elements. The ceramic coatings at Mayvinci are top of the line products that our team of professionals will install on your vehicle. To book a ceramic coating service, please call Mayvinci at +1 424-335-6356 or visit our shop at 854 S Robertson Blvd, Los Angeles, CA 90035, United States.
